Lever Type Hollow Four Jaw Double-acting Feeding Chuck Laser Chuck
1. Description
This hollow feeding chuck is specially designed for laser tube cutting equipment. The quick clamping and loosening actions can be made by air intake through the gyrator which is at the end of the chuck.The air source supplies air continuously during work.
This chuck has large clamping force, high efficiency and the ability of clamping is very stable. It is convenient to adjust all the parts of it. The stiffness of the chuck is higher than long clamping claw and its accuracy can be maintained for a long time. And it is impossible to affect the rotary precision because of the bending deformation of the clamping claw. And the design length of the clamping claw is short. Under the circumstance of maximum clamping force, it will not occur the slippery and unstable clamping. Moreover, the chuck is in a simple structure and light wight.
2. Performance Parameters
| | W300T-40 |
| | 108mm |
| | 3.6KN |
| | 0.3-1MPa |
| | 400r/min |
| | 10-320mm |
| | 182.5mm |
| | 1.05g.m2 |
| | 100kg |
| | 168kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | H | M | N | P | Q | S | T | G |
| W300T-50 | 320 | 145 | 304 | 386 | 150 | 70 | 290 | 50 | 45 | 2 | 30 | M8 | 18 | 521.5 | 802 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
6. Our Service
1. We are the direct factory with good price and fast lead time.
2. Professional design team work with you.
3. Professional QC team to guarantee the high quality.
4. Providing OEM & ODM service.
